HYDRO BAN® HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates. Allow for flood testing in 2 hours at 70°F (21°C) or higher¥ Does not require the use of fabric.* Bonds directly to metal, PVC and ABS plumbing fixtures only Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured Changes in color from a light sage to an olive green when cured Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test) Exceeds ANSI A118.10 and A118.12 IAPMO approved Contains Microban® antimicrobial product protection Rapid drying for a faster time to tile Lighter color for ease of inspection Safe—no solvents and non-flammable Install tile, brick and stone directly onto membrane * For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions ¥ Refer to cautions section for more information on curing look for anne laureano
laureanojulieann@yahoo.com.ph